Product ID:EA 907 PART B
MSDS Date:01/05/1988
FSC:8040
NIIN:00-967-7346
Kit Part:Y
MSDS Number: BFZZB

Emergency Phone: (415)687-4201

Info Phone: (415)687-4201

Preparer: SUZANNE FRANZ

Cage: 14347

Telephone: 716-372-6300/6309

Cage: 14347

POLYAMIDE RESIN

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATL MAY CAUSE SKIN IRRI & POSSIBLE
ALLERGIC REACTIONS. PROLONGED & REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Explanation of Carcinogenicity:NOT APPLICABLE
Effects of Overexposure:IRRITATION TO SKIN. POSSIBLE BURN TO EYES.
Medical Cond Aggravated by Exposure:N.A.

First Aid:EYE:IMME FLUSH W/LGE AMTS OF WTR FOR AT LEAST 15
MIN.SKIN:WASH THORO W/SOAP & WTR,RUBBING ALCOHOL/HAND CLEANER.DO
NOT USE SOLVENTS.RMOV SOILED CLOTHING.IF IRRIT PERSISTS,SEE
PHYSICIAN. INHALATIO N:REMOVE FROM EXPOSURE.SUPPORT BREATHING (GIVE
O*2/ARTIFICIAL RESPIRATION). INGESTION:CALL MD IMMEDIATELY .

Flash Point Method:TOC
Flash Point:>300F/148.9C
Lower Limits:N.A.
Upper Limits:N.A.
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROT CLOTHING,GLOVE & SAFETY
GLASSES.SCRAPE UP & TRANSFER TO METAL CONTAINER. WIPE UP REMAINING
RESIDUE W/SOLVENTS, OBSERVING SOLVENT FLAMMABILITY CAUTIONS.
Neutralizing Agent:N/K .

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE W/LABEL
INSTRUCTIONS .
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT NEEDED W/GOOD INDUSTRIAL VENTILATION (MFR).
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:N/K
Supplemental Safety and Health
PH:N/K .COND TO AVOID(POLYM):BE BONDED.FAILURE TO OBSERVE CAUT MAY
RESULT IN EXCESS HEAT BLD-UP W/RELEASE OF TOX GASES.

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:<0.01 MM
Vapor Density:NIL
Spec Gravity:>1
Evaporation Rate & Reference:NIL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CREAM COLORED PASTE W/SLIGHT AMMONIACAL ODOR.
Percent Volatiles by Volume:N.A.
Corrosion Rate:

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:N.A.
Hazardous Decomposition Products:CO, NO*X, ALDEHYDES, ACIDS &
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENT IN
BATCHES >1 LB TOTAL.DO NOT HEAT MIXED ADHESIVE UNLESS CURING
SURFACES TO (SUP DAT)

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E (MFR).
DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.